Loadhandler Products by Blue Ridge Design Studios

Pickup Truck Unloader
"No Shoveling, No Climbing, No Bad Back"

pic1
 
Unfurl the Dragsheet
pic2
 
Take on the Load
pic3
 
Drop the Tailgate
pic4
 
Insert Crank and Unload

 
The Loadhandler unloads up to 3000 lbs. of any kind of material from your pickup truck in 30 seconds.  
 
 You have a 30-day, money back Guarantee with Loadhandler. If you are unsatisfied in the first month, simply return the unit to us for a full refund.
   
No Drilling  Easy to install, comes on & off in about a minute.
      • Belts onto tailgate - no welding or drilling.
 

Loadhandler Model specs:

LH2000/LH2000M    "Universal Standard (Full-Size and Mid/Compact)"  

          $99.99 + $19.95 Shipping & Handling     [ To Purchase ]

LH3000                       "Universal Full-Size Heavy-Duty"

          $169.99 + $19.95 Shipping & Handling    [ To Purchase ]

Doubl-Mat    "Loadhandler Slip-Liner"    ( Optional -see details below )

          $59.00 + $22.00 Shipping & Handling     [ To Purchase ]

Universal Bedliner Rake     "Remove materials from bedliner grooves"

          $8.00 + $2.00 Shipping & Handling      [ To Purchase ]
Model Roller Bar Dragsheet
(width x length)
Unit Weight Capacity
LH2000 68" 50" x 15' 20 lbs. 2000 lbs
LH2000M 60" 42" x 15' 18 lbs. 2000 lbs.
LH3000 67" 52" x 15' 31 lbs. 3000 lbs.

NOTE: Loadhandler units have adjustable brackets that belt onto the tops of tailgates, so it is the width of the tailgate (left to right, or Driver Side to Passenger Side) that is important in determining which Loadhandler models will fit your truck.

Bed length and type of cab are not important in determining which Loadhandler model to purchase.

Full-Size (fleetside) tailgate widths range from 61" - 67" and accommodate either the LH2000 or LH3000.

Mid-Size (fleetside) tailgate widths range from 52" - 57" and accommodate the LH2000M.

Step-Side (non-fleetside) tailgate widths range 44" - 52" and accommodate only the LH2000M.
Includes both Full-Size and Mid-Size step-sides (and the F-150 Super Crew which has a tapered tailgate of 52"). For Mid-Size step-sides (Ford Ranger, Chevy S-10, etc.), dragsheets need to be trimmed 4"-5" inches in order to fit the narrow tailgates. Call 800-580-0791 for details.

LH2000
Universal Full-Size Standard
Fits all Full-Size pickups (except Step-Sides), including 1/2-ton, 3/4-ton and 1-ton

• Chevy Silverado
• Dodge Ram
• Ford F-Series
• GMC Sierra
• Nissan Titan
• Toyota T100/Tundra

Best model for 1/2-ton trucks. Also recommended for light-duty on 3/4- and 1-ton trucks. Does not fit F-150 Super Crew. (The LH2000M does fit F-150 Super Crew.)
 

LH2000M
Universal Mid-Size/Compact Standard
Fits all Mid-Size, Compact and all Step-Sides

• Chevy S-10 & Colorado
• Dodge Dakota
• Ford Ranger & F-150 Super Crew
• GMC Sonoma & Canyon
• Honda Ridgeline
• Isuzu
• Mazda
• Mitsubishi Raider
• Nissan Frontier
• Toyota Tacoma

Best model for all Mid-Size trucks.
Also best model for all Step-Sides (both Full-Size and Mid-Size/Compact Step-Sides).
 

LH3000
Universal Full-Size Heavy-Duty
Fits all Full-Size pickups (except Step-Sides and Toyota 2006 and older), including 1/2-ton, 3/4-ton and 1-ton

• Chevy Silverado
• Dodge Ram
• Ford F-Series
• GMC Sierra
• Nissan Titan
• Tundra 2007 & newer

Best model for heavy use on all Full-Size trucks, especially 3/4- and 1-ton trucks. Fits all Full-Size trucks except Step-Sides, F-150 Super Crew and Toyota T100 & Tundra 2006 & older.

The LH3000 is the most suitable Loadhandler for trailer and flat-bed application, although modification by consumer may be required. See Testimonial and Photo Gallery pictures for examples of trailler application. (Please call 1-800-580-0791 for details)
 

Q & A

Q: What is the Loadhandler?
A: Loadhandlerฎ is the most economical pickup truck unloader available. A one-way conveyor belt that attaches to a truck tailgate and, by manual cranking, will convey all items in truck bed to the rear of truck (or drop off end of tailgate if so desired).

Q: How does it work?
A: You take a load of material (virtually anything) atop the Loadhandler "dragsheet" that covers the truck bed.  When ready to unload, drop the tailgate, crank the handle and the load comes off.  In engineering terms, the Loadhandler provides a combination of high mechanical advantage and low friction.

Q: Does it really work that easily?
A: Without a doubt. If it sounds too good to be true, visit a material yard or the dumps, and ask one of the Loadhandler users, who visit frequently, how the unloader works for them. Or better yet, watch them unload.

Q: How strong do I need to be?
A: The most stubborn loads (rock, gravel, etc., up to 1.5 tons) come off with 70 lbs. of pressure on the crank handle. Other loads that create less drag (mulch, firewood, boxes, etc.) can be removed with much less pressure - many loads an 8-year old child could unload. 

TIP: On VERY heavy loads, spray bed-liner or truck bed with Silicone spray (or Armor-All) to make more slippery. 

Q: Who is the Loadhandler customer?
A: Landscapers, homeowners, gardeners, farmers, do-it-yourselfers, roofers, contractors, grave-diggers, grounds-keepers, camp-grounds, utilities or anyone who owns a pickup truck.

Q: Can I install it myself?
A: Yes. The first "fitting" will take 3 to 5 minutes. After that it takes about 30 seconds to install or detach.

Q: What is the "dragsheet"?
A: The dragsheet is a rip-stop woven polyolefin fiber (Polypropylene weave) with a tensile strength of 10 tons across its width and length.  The dragsheet is attached to the Roller with duct tape and can be easily replaced.

Q: How long will the dragsheet last?
A: With care, the dragsheet will last many years, or up to 500 unloadings.  Small rips can be patched with duct tape.

Q: How do the Guarantee and Warranty work?
A: You have a 30-day, money back Guarantee with Loadhandler. If you are unsatisfied in the first month, simply return the unit to us for a full refund.

After 30 days, your Warranty is good for one year on all parts. If a part breaks, simply call us at 800-580-0791 and we will replace the item free of charge. If you are beyond the 1-year Warranty, spare parts are inexpensive.

Q: Can I purchase replacement parts?
A: Absolutely. All parts are replaceable and can be easily purchased directly from us by e-mail.   Dragsheets, handles, brackets, straps, etc. - all spare parts are available and inexpensive.

Q: Will it fit my truck?
A: Yes, and it is available in 2,000 and 3,000 pound models. Brackets are adjustable to fit any tailgate.

  It fits trailers also !!

 

Universal Bedliner Rake.  

The Bedliner Rake has grooved “teeth” to fit inside the grooves of virtually any drop-in bedliner and quickly removes:

Mud • Gravel • Topsoil • Sand • Mulch • Trash • Nails • Shingles • Bark • Wood Chips • Snow

bullet

Accepts Standard Broom Handles or Telescopic Painter Handles

bullet

Recycled, durable plastic construction

bullet

Won’t damage your bedliner

bullet

Cleans in one pass

   $8.00 + $2.00 Shipping & Handling      [ To Purchase ]

"LOADHANDLER SLIP-LINER"

doubl-mat
 
bulletDimensions: 4 ft. x 8 ft. x 1/4 in. thick
bulletWeight: 32 lbs.
bullet$59.00 + $22.00 Shipping & Handling [ To Purchase ]
FITS ALL FULL-SIZE TRUCKS & TRIMS TO FIT ALL MID-SIZE OR COMPACT TRUCKS

The DOUBL-MAT is the number one solution to bed lining and the only reversible bed-mat on the market. Loadhandler's DOUBL-MAT combines a ribbed rubber surface to reduce load shifting with a high density polyethelyne (HDPE) surface for easier loading and unloading. Unlike rubber bed mats that must be removed when loading and unloading heavy cargo, the DOUBL-MAT HDPE surface allows you to slide your load, providing crucial bed protection when damage is most likely to occur.

Benefits of the DOUBL-MAT

bulletThe rubber side provides a non-slip surface to stabilize cargo.
bulletThe HDPE side provides a low friction surface that reduces the effort required to load/unload cargo.
bulletThe DOUBL-MAT is ideal for use with all Loadhandler pickup truck unloaders.
bulletThe DOUBL-MAT HDPE surface reduces the Loadhandler crank force and is ideal for trucks with damaged beds or loads over 1500 lbs.

 

Loadhandler spare parts and replacement parts are available here online

Patented in 1993       Over 600,000 units sold.

 [ To Purchase ]      [ Blue Ridge Studios Home ]